actually they would be correct :

USB began as a protocol where one side (USB-A) takes the leading role and the other (USB-B) the following role . this was mandated by hardware with differently shaped plugs and ports . this made sense for the time as USB was ment to connect computers to peripherals .

however some devices don’t fit this binary that well : one might want to connect their phone to their computer to pull data off it , but they also might want to connect a keyboard to it , with the small form factor not allowing for both a USB-A and USB-B port. the solution was USB On-The-Go : USB Mini-A/B/AB and USB Micro-A/B/AB connectors have an additional pin which allows both modes of operations

with USB-C , aside from adding more pins and making the connector rotationally symmetric , a very similar yet differently named feature was included , since USB-C - USB-C connections were planed for

so yeah USB-A to USB-A connections are explicitly not allowed , for a similar reason as you only see CEE 7 (fine , or the objectively worse NEMA) plugs on both ends of a cable only in joke made cables . USB-C has additional hardware to support both sides using USB-C which USB-A , neither in the original or 3.0 revision , has .